We have a wide and varied selection of quality equine equipment. Products include models of 5-rail livestock gates and wire filled gates, several corral panels and corral arched entry panels, and round pens available in 40' and 60' diameter. We also offer traditional and original horse stalls, both with vertical rails that are 1"/14 gauge material and vertical bars on fronts and dividers that are at 3" spacing. Our horse stalls have a number of special features. Finally, our horse shelters, horse tacks, and stall connectors are plentiful and top quality.
Arched entry panels are available for all three corral panel styles. Arched entry panels are constructed to eight CP Heavy Duty or CP Standard specifications with 16 gauge high tensile steel tubing. Arch may be purchased as separate unit (Bow Gate) or welded into panel construction (Entry Panel). Standard arch is 4' wide and 84" high. 4' arch openings are comparable to 4' tubular gates. Powder coated HW Brand.
Round Pens are available in 40' and 60' diameter. Round pen panels are six rail, six feet tall with quick chain wrap connection. Round pens are made with 16 gauge oval tubing and oval vertical rails fully mitered for a safe smooth finish.
Horseback/ lever-latch is standard on 6' x 10' ride through entrance panel on both the 40' and 60' round pen. Optional arch frames and additional panels may be added to connect an alley or holding area outside of the round pen.
Connectors hold corral panels securely together at both the top and bottom ends. Wall brackets allow you to mount the panel directly to the wall, while the 2-, 3-, and 4-way connectors allow you to set up your panels in the configuration that best suits your needs.
Traditional stalls are made with 2" x 2" square 16 gauge frame material. Vertical rails are 1"/14 gauge material. All vertical bars on fronts and dividers are at 3" spacing.
Horse-proof latch is mounted flush with door. Stall fronts have door in the center. Stall door rolls on aluminum rollers for a smooth, quiet motion. Drop down grill is recessed into rolling door.
Feed grills come standard with Traditional stall fronts. Grills give access into the stall for feeding and watering purposes. Feed grill frame material is made with 1 1/4" x 1 1/4" square frame material with 1"/16 gauge vertical rails.
Stall fronts and dividers come in 10' and 12' lengths. Dividers come in two styles; Vertical rail dividers and ...
Original stalls are made with 2"/14 gauge round tubing frame material. Vertical rails are 1"/14 gauge material. All vertical bars on fronts and dividers are at 3" spacing.
Stall door rolls on aluminum rollers for a smooth, quiet motion. Sliding door has a drop-down grill built into the door. Feed grill is built into the stall front opposite of the door for access into the stall.
Stall fronts and dividers come in 10' and 12' lengths. Dividers come in two styles; Vertical rail dividers and Solid dividers. Dividers and fronts have 1 1/2" channel welded into frame to receive lumber. On the inside of dividers and fronts, the channel is cut-out for lumber installation. Lumber is not included with stall fronts or dividers. ...
The Horse Shelter protects your horse from extreme elements, yet is affordable and sturdily built. The 12' x 12' shelter is constructed of 2"- 16" gauge tubular steel and can be fitted with either a canvas or steel roof.
Not large enough? No problem. 12' x 12' add-on kits and roof extensions are available.
For use with Traditional and Original horse stalls. Can be hooked up in a series or back to back.
Connectors hold stall sides securely together at both the top and bottom ends. Adjustable wall brackets allow you to mount the panel directly to the wall, while the 2-, 3-, and 4-way connectors allow you to set up your stalls in the configuration that best suits your needs.